The Peco Puller: A Safe and Faster Way

The PECO Puller is manufactured in the United States and has been utilized by municipalities and contractors across the country to safely and efficiently remove manhole castings. If you’re responsible for manhole repair and maintenance, you know just how important that is.

STANDARD SIZES

The PECO Puller manhole cutter is a standard product, but it can also be customized to accommodate different sizes.
Standard sizes available: 42" x 12", 48" x 12” or 60” x 12”

 

INTERCHANGEABLE PARTS TO HANDLE ALL YOUR MANHOLES

Because manholes come in a wide variety of sizes, the PECO Puller comes with your choice of standard sizes for both the centering plate and the cutting wheel. Each plate and wheel shown below can be easily removed from the Puller and quickly replaced with a different size. This versatility is enhanced by the fact that the diameter of each centering plate is bi-adjustable (both coarse and fine adjustments are possible) in order to assure a perfect fit — and perfect pull — every time.

 

PECO PULLER SIZE SPECS

 
Diagram-e1560444601253.png
 

A. Centering Plate

21″ – 26″
26″ – 31″
31″ – 36″
36″ – 41″

B. Cutting Wheel Diameter

22″ – 60″

C. Cutting Wheel Depth

8″ – 24″

 

If none of the standard sizes shown above meets your needs, PECO can manufacture customized parts at a reasonable cost.

Ask us for a custom quote.

 

 ADDITIONAL PRODUCT DETAILS

Construction: All welded steel

Cutting Diameter: Available from 22 inches to 60 inches

Cutting Depth: Maximum of 24 inches

Cutting Teeth: Carbide teeth (replaceable)

Centering Plate: Replaceable and interchangeable to fit various manhole diameters

Extractor Arms: Three with replaceable carbide tips

Drive Shaft: 2 3/8 inch diameter solid steel with hex end at drive motor coupling

Drive Motor: Hydraulic, positive displacement with gear reduction

Hydraulic Capacity: 15-30 GPM. Flow rate to 3,000 PSI (min. 1,500 PSI)

Weight: Approximately 500–1,200 pounds, including hydraulic motor (depending on size of cutter)

Overall Height: Approximately 70 inches including hydraulic motor (depending on size of cutter)

Manufacturing: Made in the USA